Tuesday, October 13, 2020

Garden of freestyle delights - A cracked pot repair

The Find

A while ago I found this pot that was not just cracked, but also had a hole near the top.  

I took it anyway. 

Because free. Because planter. 

Broken unglazed pot sitting on yellow table
Broken unglazed pot












The Fix

In the same way that I fixed this large round pot with large cracks and this glazed green pot with multi-directional cracks, I decided to trust the fix to some 2-part epoxy.  I don't have a special applicator, I just used some small pieces of cardboard to mix the epoxy and then smear it on both sides of the crack.

Broken pot with epoxy applied
Broken pot with epoxy applied





















After I had applied the epoxy I let it dry and then got ambitious and wanted to scrap off some of the excess.  This caused the disturbed parts to turn white, normally the epoxy will dry clear, so I learned something new there.  Don't disturb the epoxy after it has started to dry!


Broken pot with epoxy dried, sitting on yellow table
Broken pot with disturbed epoxy, dried 














Although the cracks wind around quite a bit of the pot, they can still be hidden by turning the cracked side to the back.

Conclusion

I got some lovely hot pink snapdragons and decided they were the right scale of plant to use in this pot.  In order to prevent dirt from spilling out the hole I partially filled the pot with dirt, then placed a broken piece of pottery (found some months ago) on the inside of the pot, then added some more potting soil and the plant.

Pink snapdragons with repaired pot to be planted into
Snapdragons!


In order to prevent dirt from spilling out the hole I partially filled the pot with dirt, then placed a broken piece of pottery (found some months ago) on the inside of the pot, then added some more potting soil and the plant.

Top view of broken pot with dirt and ceramic shard
Potting soil and hole-blocking ceramic shard





From the side it looks like the broken pottery insert, although not a perfectly flush fit against the inside of the pot, it is blocking the dirt as intended.
Ceramic shard blocking hole in pot, outside view
Ceramic shard blocking hole, outside view














After I finished potting up the snapdragons everything looked great!  I didn't mind a bit of the epoxy showing, none of us are perfect.


Pink snapdragons in a newly repaired pot
Snapdragons in a newly repaired pot













Happy freestyling, don't be afraid to scavenge something and make it beautiful.

Tuesday, October 6, 2020

Garden of freestyle delights - a SECOND metal hayrack planter appears in the night

 The Find

While out for a walk one night I came across a surprising find, a metal hayrack planter (complete with coir liner, dirt, and some plants that looked relatively healthy).  Why was this surprising, at this point I shouldn't be surprised by anything left out on the sidewalk.  At the time it seemed like the garden-related giveaways and clean outs had slowed down, so perhaps that was the reason for surprise. 

Discarded hay rack planter with plants
Discarded hay rack planter

I didn't take it with me right away, but waited until I was on the way back and near the end of my walk. It is always a risk to walk away from something left out for free, but luckily no one had scooped it up while I was finishing taking my exercise.  I decided to get rid of the existing dirt and plants because I knew right away that I would be putting something new and colorful in this planter.  I had found my first metal hay rack planter in early spring and loved the classic style.  I had thought about buying more hay racks but ended up buying two metal baskets because they were the only things in stock when we went to the superstore garden center.  Don't get me wrong, I like the look of the baskets, but in a small space the hay racks are a better fit up against a fence to give maximum plant frontage.

Here is the outer metal-only part of the hay rack planter without the liner. You can see that there are attachments in the back if you want to hang the planter on screws or hooks. I didn't do that, I went an even easier route.

Metal hay rack outer frame with curve design
Metal hay rack outer part









The Hay Rack Makeover

I hung up the planter with some repurposed cording that had previously been used to hang up a set of individual plastic planters arranged in a pleasing geometry.  This bit of fence has seen quite a few different planting arrangements over the summer.  I planted some bright yellow mums to tie into the patio table color and some small Angelonia plants with purple flowers to carry over the purple from the neighboring hay rack planter full of purple petunias.

Metal hay rack planter with yellow mums and purple petunias in front
Hayrack planter with mums, angelonias, and petunias

Conclusion

I love the second hay rack planter, even though the metal frame has a different design from the first one I found.  Not-matching is pretty much par for the course when you get your gardening supplies for free!  I think the $1 yellow mums appeared in my world at just the right time too. I bought 5 pots of yellow mums for $5, and good thing that I did because that offer was gone within a week. 

Here are the two hay racks along the fence.  The original hay rack was planted with purple petunias, some of which are now long enough that I was able to drape them around the edge of the second planter.

Planters with yellow and purple flowers hanging from a wooden fence
The fence in all its planterly glory



Happy freestyling, and always think about donating before discarding!

Tuesday, September 22, 2020

Garden of Freestyle Delights - Ornamental Ginger While Out for a Walk

The Find: Free Ornamental Ginger

While out for an evening walk I came across a very exciting sign in someone's yard next to the side of the road.  It said, " FREE ................. ORNAMENTAL GINGER" and there was a plastic bag with pieces of root inside.  I even took a picture for posterity.

Free ornamental ginger root, with sign
Free ornamental ginger root, with sign


I let the root sit around for a few days until I acquired another set a free planters.  Spring is a good time for getting unwanted plastic (or broken ceramic) planters.



Stack of free plastic plant pots
Stack of free plastic plant pots

























Growing Ornamental Ginger


I planted the ornamental ginger in some potting soil, unsure if it would every sprout. Had I ignored it for too long? Had I planted it too shallow? Would it rot instead of revive? These are the doubts that plague a gardener. 

But plants can surprise you with their hardiness, at least this ornamental ginger root cutting did. 


First ornamental ginger sprout of red and green
First ornamental ginger sprout


 






















And then it got a little taller....

Ornamental ginger sprout approximately 4inches tall
Ornamental ginger sprout approximately 4inches tall

























And then it got this tall and has stayed like that for a while!  I'm still waiting on flowers though...

Ginger plant and Clematis plant on staircase
Ornamental ginger co-planted with an impulse purchase clematis







































In addition to the vertical growth (a.k. the plant's "habit" in the parlance of the horticultural world) I like the slight striping (variegation) of the leaves, which is visible in the photo below.

Close-up view of slightly variegated ginger plant leaf
Slightly variegated ornamental ginger plant leaf





















Conclusion

When taking plant cuttings or roots, be aware of the risk of spreading invasive species or pests.  In this case the root cuttings were from the same neighborhood, and I was planning to grow the plant in an isolated container on a patio - not in the ground.  I'm not sure whether this plant would get taller if it were planted in the ground and could develop deeper roots, but that is not something I can experiment with right now!

Happy freestyle gardening, don't be afraid to scavenge for beauty!

Tuesday, September 15, 2020

Sailing into a future involving gold paint, a framing adventure

The Find

While out for an evening walk I came across this LARGE and beautifully framed photo of a sailboat.  Framed with real glass in the front, amazingly unbroken, and reliably heavy.  So what did I do?  I carried it home with only a vague purpose in mind, thinking maybe it would fit some fancy paper that I bought to use as a poster.

Free frame with sailboat picture
The freestyle green-framed find











The Makeover

Normally I love teal. Teal is my jam.  Cerused teal? Are you kidding? I refinished an end table AND refinished a small oak bookshelf to try to achieve a similar look.  With this frame I think the pattern is some sort of overlay, or something printed on, it isn't actually teal-dyed perused wood.  Perhaps it is for the better because a frame made out of solid oak would have been even heavier.

Corner detail of green picture frame
Corner detail or the original frame























With this frame I wasn't feeling the teal, I was feeling the fake gold.  First things first, I had to take it all apart and clean it, oh, and sadly throw out the large intact piece of glass.  Sigh. It made me sad, but having glass in large frames makes them heavy, which makes them harder to hang, and that glass is very breakable which makes me nervous.  Heavy + breakable + suspended from a single nail on a wall is not a reassuring combination.  Anyway, here is what the frame looked like underneath the dust wrapper, pretty standard assembly.


Inside the back of the frame
Inside the back of the frame













Lots of little framer's points to pull...and save for later.

Inside of the back of the frame, corner detail
Inside of the back of the frame, corner detail












The first coat of gold paint is always a little streaky. I expected it to take a few coats to cover the darker green and bald underneath....and I was right.  Patience is the key, I try to use thin coats with plenty of dry time in between. 
After the first goal of gold paint
After the first goal of gold paint









After the painted was complete I looked at some decorative papers I'd purchased and with the existing matting they were the right WIDTH but not the right LENGTH...... you can see some of backing board showing at the bottom with printed text on it.

Poster with backing showing
Poster with backing showing













I wanted to use this "Minerologie" paper anyway so I decided to fill in the blank spot at the bottom of the frame with slightly textured watercolor paper. 


Poster with backing covered by watercolor paper
Poster with backing covered by watercolor paper



After some generous use of double-sided tape I re-assembled all the pieces, including poking those original framer's points back into their original holes.
You can see the edges between the watercolor paper pieces a little better in the close-up below.


Closeup corner detail of watercolor paper overlapping poster
Closeup, corner detail of watercolor paper overlapping poster
















The Final Result

I LOVE the way this turned out, even with the oddity of the watercolor paper at the bottom. I just think of it as a title bar like you sometimes see on posters purchased from museums.  In this case it happens to be a blank title bar, but no matter, I can always fill it in with some script if I ever trust my own handwriting.

Minerals poster in new gold-painted frame
Minerals poster in new gold-painted frame



















I think the warm shininess of the gold paint is an excellent setting for this colorful poster of minerals.

Happy freestyling, don't be afraid to take the freestyle frame even if you aren't sure what it will turn into.  Finding beauty from scavenged pieces gets easier with practice.